
Higher dispensing accuracies possible with many raw materials.
ILS – Modules
Powder dispensing
- Dispensing accuracy
- Typically <5 mg for all quantities
- Higher dispensing accuracies possible with many raw materials
- Achievable dispensing accuracies should be determined in
preliminary tests
- Dispensing time strongly dependent on powder and dispensing
quantity (typically: 0.5 to 5 min) - Storage of raw materials in powder containers with a volume
of approx. 300 ml (larger volumes possible) - Weighing and documentation of the mass actually dispensed into the
vessel - Raw materials tending to separation or compaction can be shaken
loose before each dispensing (handling by robot) - Addition of milling beads